S JB874
Weight: kg

EON 210P

JBL
System
- System Type: Powered mixer with 2 two-way bass-reflex enclosures
- Maximum SPL Output: 124 dB peak system output (pink noise)
- Frequency Range (-10 dB): 60 Hz - 20 kHz
- Frequency Response (+/-3 dB): 75 Hz - 19 kHz
- AC input: 120 - 240 V 50/60 Hz, voltage selector switch sets operational range

Amplifier
- Design: Crown Class D
- System Power Rating: 300 Watts (2 X 150 W Sine Wave Burst)
- Output Connector: 2 X 1/4 in. TS (unbalanced) amplifier outputs

Mixer
- Input Connectors: 8 inputs (4 Mono Mic/Line, 2 X Stereo)
- Channels:
- - 1-4: XLR / 1/4 in. jack combo connectors; XLR is mic level input, 1/4 in. is line level input
- - 5-6: Two of 1/4 in. balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
- - 7-8: 3.5 mm stereo jack
- Input Impedance:
- - 1-4 Combo: XLR 3 K Ohms Balanced, Ch 1-4 Combo: TRS 20 K Ohms Balanced
- - 5-6: TRS 25 K Ohms Balanced
- - 5-6: RCA 12 K Ohms Unbalanced
- - 7-8: 3.5 mm 30 K Ohms Unbalanced
- Phantom Power: 30 V
- Output Connectors:
- - Monitor outputs: Two 1/4 in. balanced TRS jacks (stereo), and RCA jacks (stereo)
- - Headphone output: 3.5 mm stereo jack
- Signal Indicators: Main Output LED Ladder Limit: Red LED indicates limiter active condition; Signal: Green LED indicates signal present
- Signal Indicators (CH 1-4): Peak LED: Green = signal present, Red = input overload
- EQ: Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
- System Limiter: On Board DSP Limiting and Tuning

Speaker
- LF Driver: 1 x JBL 328 H 250 mm (10 in) woofer
- HF Driver: 1 x JBL 2414H-1 37.5 mm (1.5 in.) annular polymer diaphragm, neodymium compression driver
- Coverage Pattern: 100 x 60 degrees nominal
- Crossover Frequency: 2 kHz
- Crossover Type: Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
- Enclosure: Polypropylene
- Suspension/ Mounting: 36 mm pole socket with stabilizing screw
- Handles: One on top
- Grille: Powder coated perforated steel
- Net Weight of System: 33 lbs.
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 43 lbs
Shipping Dimensions: 14 x 26 x 22 in
PA Pack
Shipping Weight: 65 lbs