S JB678
Weight: kg
The unique, contemporary curved design provides a stylish look with plenty of versatility. A 70V/100V transformer and outdoor capability make Control CRV ideal for a wide variety of commercial applications. The Control CRV offers numerous mounting options and a wide range of configurations, providing an endless variety of solutions in terms of coverage, appearance and mounting.

High Design Loudspeaker with 70V/100V Transformer. Weather Resistance. Unique, contemporary, curved design. Dual 100 mm (4 in) woofers provide superb sound quality. Combinable into half-round or full 360° round arc clusters.

Specifications :  

Frequency Range    :    80 Hz – 20 kHz 
Power Capacity        :    75 W continuous pink noise (300 W peak) 
Transformer              :    Selectable 70V/100V or low impedance 
Usability                     :    Indoor/outdoor capable 
Colors                        :    Black, or White (-WH)  
Accesssories           :    Wall-mount bracket included (pole-mount bracket optional) 


S JB044
Weight: kg
2 way small monitor - 150watts/4ohm, plastic housing.  Colour: Black


S JB045
Weight: kg


Control 1 Pro 2 way small monitor - 150watts/4ohm, plastic housing. Includes wallmount fittings. Colour: Black


S JB722
Weight: kg

The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.


Frequency Range (-10 dB)   :   32 Hz – 200 Hz
Frequency Response (±3 dB)   :   50 Hz – 150 Hz
Power Capacity   :   300 Watts Continuous
Program Power (2 hrs)
150 Watts Continuous
Pink Noise (2 hrs)
200 Watts Continuous
Program Power (100 hrs)
100 Watts Continuous
Pink Noise (100 hrs)
Nominal Sensitivity (2.83V, 1m)   :   95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m)   :   115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance   :   8 ohms (in bypass/thru mode)
Transformer Taps   :   80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer Driver   :   200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input Connectors   :   Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
Material   :   Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D)   :   Cabinet: 356 x 391 x 203 mm
(14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket   :   2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight   :   9.0 kg (20 lbs)
Shipping Weight   :   10.2 kg (23 lbs)
Included Accessories   :   Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment


S JB661
Weight: kg


Perfect for a range of professional applications including:
  • Recording / Video Production
  • Entertainment Installations
  • AV Presentations
  • Monitoring of Electronic Musical Instruments


    Studio quality transducers for accuracy, and rich bass response: 80 Hz - 20 Khz

    35 watt per-channel power amplifier and high sensitivity drivers produce exceptional output: 115 DB max SPL per pair

    Balanced XLR, ¼”, and unbalanced RCA inputs allow connection to a range of signal sources

    Stereo headphone jack allows monitoring using headphones

    Ergonomic, side-mounted volume control -simultaneously controls left and right speakers

    High frequency adjust control - allows the user to contour HF response to application requirements

    Magnetically-shielded transducers for use near CRT monitors and magnetically sensitive equipment

    Internal peak limiter and overload protection circuit - protects the system from damage caused by continuous over-driving

    Wall-mount capable using optional MTC-2P mounting kit

    Included snap-on pedestals optimize listening angle for desktop applications


    S JB053
    Weight: kg
    The Control 5TM is a high performance,
    wide range control monitor
    suitable for use as the primary sound source in a variety of applications.
    Smooth, extended frequency response combines with wide dynamic capabilities to provide acoustic performance that makes the Control
    5 ideal for recording studios, audio-video control rooms, remote trucks and broadcast studios. Clean,functional visual design makes the
    Control 5 also ideal for foreground music systems, moderate level sound reinforcement, discotheques and music playback systems.
    A 165 mm (6½ in) low frequency driver provides solid, powerful bass response to 50 Hz. High frequency response to 20 kHz is handled by a
    pure titanium 25 mm (1 in) dome.
    Both transducers are magnetically shielded, allowing for use in close proximity to video monitors. The dividing network incorporates protection
    circuitry to prevent system damage and utilizes high quality components including bypass capacitors for outstanding transient accuracy.
    Molded of dense polypropylene foam, with a finish of black, gray or white, the Control 5 enclosure offers a pleasing shape that fits easily into any
    environment. Wall, ceiling, rack and tripod mounting systems allow positioning
    of the system in exactly the right spot for optimum performance.

    CONTROL 23

    S JB644
    Weight: kg

    The Control® 23 is the most compact of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers making it a perfect choice for patios, foyers, retail or other applications where foreground/ background music and paging are required, with minimum aesthetic impact.


    -Components: 3.5 in Polypropylene coated woofer, .5 in Titanium coated horn loaded tweeter.

    -Built-in InvisiBall® mounting hardware*.

    -Weather resistant enclosure and transducers.

    -Readily paintable to match decor.

    -90° x 90° high frequency horn.

    -Overload Protection Circuitry.

    -Sensitivity: 86 dB SPL, 1 W, 1m

    -Patents pending worldwide

    CONTROL 25

    S JB643
    Weight: kg

    The Control 25 is perhaps the most versatile of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.


    -Components: 5.25 in Polypropylene coated woofer, .75 in Titanium coated horn loaded tweeter.
    -Built-in InvisiBall® mounting hardware*.
    -Weather resistant enclosure and transducers.
    -Readily paintable.
    -90° x 90° high frequency horn.
    -Overload Protection Circuitry.
    -Sensitivity: 88 dB SPL, 1W, 1m
    *-Patents pending worldwide


    S JB049
    Weight: kg
    The Control 26C is a powerhouse ceiling speaker containing a coaxially mounted 6.5" woofer and 3/4" titanium-coated tweeter, able to deliver maximum sound level over a wide coverage area. The Control 26CT includes a multitap transformer for a 70V or 100V line distribution system.
    • 75 Hz to 20 kHz frequency range (-10 dB)
    • 140 watts continuous program power capacity
    • 89 dB sensitivity (1W/1m)
    • 16 ohms nominal impedance
    • 110° conical coverage (polar)
    • Steel back-can with removable locking connector
    • Control 26CT 70V taps: 60W, 30W, 15W, 7.5W
    • Control 26CT 100V taps: 60W, 30W, 15W.
    • Dimensions (height x diameter):  210 mm x 252 mm (8.3 in x 9.9 in)
    • Net Weights:  Control 26C = 3.4 kg (7.5 lb), Control 26CT = 4.2 kg (10 lb)

    CONTROL 28

    S JB047
    Weight: kg
    8" Two-Way Vented System, Built-In Invisiball® Installation System, 175W Power Program, 8 ohms.  Black, Priced as Each, Packed as Pairs.  Master Pack Quantity:  2 Pieces.

    CONTROL 30

    S JB052
    Weight: kg
    The Control 30 utilizes high power components, computer optimized horn and coaxial component design, patent-pending cabinet manufacturing techniques, and a complex network to achieve smooth high fidelity performance, extended bandwidth and well-controlled, defined coverage from a compact loudspeaker.
    A symmetrical mid-high frequency horn allows use of the speaker in either vertical or horizontal orientation. Smooth frequency response and cone-midrange performance ensures excellent sound character throughout the frequency band, over the entire listening area. The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8 ohm impedance allows use of multiple speakers on a loudspeaker line.
    The included InvisiBall mounting method is simple to install, aims easily and provides a high degree of theft deterrence. InvisiBall allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23°(woofer end inward). Attachment points for the optional MTC-30UB (-WH) U-bracket allows for compact installation and is particularly useful for
    low profile underbalcony applications.
    Weather resistance has been maximized. The neodymium magnet LF woofer has a fiberglass and Kevlar composite cone, the surround is pure butyl rubber, and the basket is rear loaded to minimize exposure. The MR cone of the coaxial mid-high driver is anodized aluminum with a formulation EPDM rubber surround, and the HF compression driver’s diaphragm is pure titanium.
    The coaxial component is protected by an acoustically transparent screen. The grille is thermoset composite coated and stands up very well to UV as well as humidity. The grille is backed with our WeatherMax multi-layer foam, which prevents the direct incursion of water. Nickel/zinc rust-resistant terminals ensure a secure input connection.
    An MTC-PC2 sealed-entrance cover is included to further protect the speaker’s terminals.
    JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound. Available in black or white (-WH), the cabinetwill accept a variety of paints to match any décor.

    CONTROL SB-210

    S JB054
    Weight: kg
    Compact, Low Profile, High Power Subwoofer with 2 x 260mm (10 In) Aluminum/Ceramic Composite Cone Drivers.  400 W Power Handling, Fully Outdoor Capable (IP-x5), Sonicguard™ Overload Protection,  13 M6 Suspension Points, Optional U-bracket.  42 Hz-200 Hz Frequency Range, 355 x 590 x 570 mm, (14 x 23.3 x 22.5 In).  Available in Black.

    CBT 50 LA

    S JB674
    Weight: kg
    The CBT 50LA, with Constant Beamwidth Technology™, represents a breakthrough in pattern control, utilizing analog delay beam-forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

    Features :

    • Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
    • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
    • Full fidelity bandwidth.
    • Dynamic SonicGuard™ overload protection
    • Built-in 70V/100V transformer, plus 8 ohm direct capability.

    AC 15

    S JB621
    Weight: kg


    1” Dome Tweeter with 90° x 90° Coverage.

    135 mm (5.25 in) LF transducer

    Ultra compact enclosure

    300W Program Power

    Dual Neutrik NL4 connectors plus screw terminal

    Attachment points for optional U-bracket


    Frequency Range(-10 dB): 80 Hz -20 kHz

    Frequency Response(±3 dB): 90 Hz -18 kHz

    Power Rating: 150W Cont. Pink Noise
                             600W Peak

    Impedance: 16 ohms

    Coverage Pattern: 90° x 90°

    AC 25

    S JB622
    Weight: kg


    -90° x 90° waveguide with 25 mm (1 in) dome tweeter

    -135 mm (5.25 in) LF transducer

    -Ultra Compact 2-way Loudspeaker with 2 x 5.25” LF

    -450W Program

    -Dual Neutrik NL4 connectors plus screw terminal

    -Attachment points for optional U-bracket

    Frequency Range (-10 dB): 80 Hz -20 kHz

    Frequency Response (±3 dB): 90 Hz -18 kHz

    Power Rating: 225W Cont. Pink Noise
                             900W Peak

    Impedance: 16 ohms

    Coverage Pattern: 90° x 90°

    Dimensions(H X W X D):

    377.8 x 150.3 x 177.8mm
    (14.9 x 5.9 x 7.0in)

    Weight: 7.5 kg; (16.5 lb) .


    S JB659
    Weight: kg

    The 8124 is a 4-inch, full-range, cost-effective loudspeaker for commercial applications. The 8124 features high-fidelity performance in an easy to install package. The system’s high sensitivity drivers deliver maximum sound levels using minimal amplifier power. With its contemporary grill design, 70V/100V taps and an open-back design, the 8100 series brings elegance and performance to basic commercial sound systems, or any application not requiring a backcan for installation.


    Clear, High-Fidelity Performance

    Dog-ears for easy Blind Mount Installations

    High Sensitivity (93 dB, 1W, 1m) for Maximum Power Efficiency

    6W Transformer for use of 70V / 100V Distributed Lines